.US               

SPORTident products from Scarborough Orienteering
Make the most of  your sport!

Customers      

SPORTIDENT.US STORE  for all SPORTident electronic timing or phone James Scarborough, +1 (877) 322-4670, who is now filling orders from Huntington Beach, CA.  click here  to send an e-mail to James S.

Scarborough Orienteering supports EP affordability for all North America, NZ and Australia orienteering clubs and offers the lowest prices and fastest delivery available.  Reasonable shipping worldwide.

FOR STANDS, FLAGS, HOLDERS and other Orienteer.com items, click here  to send an e-mail to Joe S. or call +1 (510) 530-3059. 

 

"SO" Control Stands and Assemblies from Orienteer.com
 The ultimate in light-weight efficiency
for SPORTident control stations or needle-only punching
Now used in seven countries around the world

Deploying SO stands     Make Your Own SO Stands   Needle Punching-only assemblies 

 

Stand price includes holder installed. Add for marker, punch, straps.
 Stands are made to order. Minimum 16
T-Bar              NEW!
T-Bar

 

(Replaces the Elite)

 36" hex rod, cross bar with pin punch, BSF7 or 8 holder and hammering cap installed.  (add $1.0 for 48")

This is the design from Scarborough Orienteering used (as modified) at the 2011 Scottish Six Days

 18.95
*
Stands include holder installed.
(BSF8, flags, punch, card extra.)		 SuperLite
SSLHD7 or 8 SuperLite, 36" x 3/8" w/holder and needle punch installed (SSLHD8 pictured)    Sturdy and hamerable.

Video shows deployment and pickup of the SuperLite assembly.  Stand/punch/flag/SI station: single tangle-free unit for service, transportation and storage. 
How to blouse video details the 15 second blousing technique.  Save wear and tear on  your equipment

 15.95
SSLHD7 or 8 (Tall) SuperLite, 48" with 3/8 rod w/holder and needle punch installed.  Increased height for deep soils or steep hillsides.  (48" usually not required for advanced flag placement.) Round
18.95

Hex
19.95
 
Gooseneck
 Back by popular demand
* Stands include holder installed
(BSF8, flags, punch, card extra.)		 SMn7 or 8 SMn (Mini) 33" x 5/16"
w/ BSF6/7 holder (5.3 oz.)

SHD,  33" x 3/8" add 1.00

THD, 44" X 3/8" (9.2 oz.) add 2.00

Add 1.00 for hex rod

The Gooseneck Mini is the graceful solution for softish  soils where only light tapping is needed.

 15.95


The original U-Top SO stand with holderless Velcro attachment has been discontinued.  Existing stands in use may be easily upgraded with B SF-7 and/or BSF-8 holders. E-mail for instructions.
 *

Tie Nylon cable ties to easily convert Velcro stands to BSF6/7 or BSF8 holder use..............5.00/100 
  Accessories
* SMc7 with nested  BSF8 holder Have to work with both BSF7 and BSF8 units?  SO stands can be used with either. BSF8 holder can snap into BSF7 holder as shown.
Shown with SMn8 above* Mar-1 Suunto Regulation Control Marker, now with lightweight, flexible frame. 4.75
Shown with SMn8 above* Pun-1A or 1B Suunto Heavy Duty Needle Punches, set A or set B $34.50 3.45
* CC Laminated code numbers for unit or stand 1.00
CCC Custom code cards w/club logo, color
(min. 10)		 2.00
* Cap Nickel plated steel capnut threaded to the top of Elite, SuperLite or Needle-only stands to prevent mushrooming.  For 5/16 or 3/8 round or hex. Installed
1.80

Replacement Cap
.92
* Blou Blousing Straps.  Two sided Velcro tape fixed to stand hold flag tight for tangle-free transport and storage, free installation with stand order

Note: Upper strap now installed under holder for increased stability

 1.45/pr
see * Tube 18" carrying tube Free of charge with stand order

* Usually in stock
Click here   to send an e-mail to Joe S.